Glass installation kit, Bondkits, single

The BondKits Bonding Kit is a comprehensive solution for professional installation of car windshields and side windows. This extensive package includes everything needed to ensure a secure and durable bond for your vehicle's windows.

Installation kit includes:

• 1 x Window adhesive cartridge, 310 ml, with long working time. A product that offers consistent performance and reliable results in various projects and conditions.
• 1 x Combi-stick Multi-active primer, 10 ml, with anti-corrosion agent, which can be used multiple times for up to 14 days, ensuring long-lasting protection and reliability in various applications.
• 1 x Cleaning wipe, non-staining glass cleaner, also used for cleaning ceramic surfaces, coatings, and polyurethane pre-bonding systems.
• 1 x Sanding pad

With the BondKits bonding kit, you can trust that every component is designed to the highest standards, providing you with a professional bond. The kit is excellent for both professional and DIY use, making glass bonding easy and reliable.

Coverage:

Normally sufficient for at least 1 window.

Usage:

1. Protective equipment

Always use adequate protective measures, such as protective gloves suitable for polyurethane adhesive, when handling any adhesive. Also, pay attention to the ventilation of gases emitted from the adhesive, i.e., possible respiratory protection.

2. Surface preparation

Roughen the bonding surfaces lightly with a sanding pad.

Clean the bonding surfaces with a cleaning wipe and allow the surface to dry. Surfaces must be clean, dry, and free of grease, oil, dust, or impurities.

Pre-treat the bonding surfaces with the included primer and allow the primer to dry for approx. 15 minutes.

3 Application

Gloves are always recommended for application, and the adhesive is recommended to be applied with a powerful cordless piston gun.

Note that the adhesive mass is stiffer to apply at low temperatures. For ease of use, it is recommended to store the product at the ambient temperature before use. The open time of the adhesive is significantly shorter in warm and humid air.

Glass bonding must always be performed within 15 minutes of adhesive application. Never perform bonding if the applied bead surface has already started to skin over.

To ensure a uniform layer thickness of the adhesive joint, we recommend applying the bead in a triangular cross-section. (Make diagonal notches in the adhesive tip)

We recommend a maximum 15mm high adhesive bead.

4. Stain removal

Uncured adhesive can be removed from tools and equipment with a suitable solvent. Once dry, the product can only be removed mechanically.

Hands and any other stained skin should be cleaned immediately with soap and water.

5. Drying

The adhesive dries at approximately 3.5mm / 24h, and the minimum drying time in a car is 2 hours. However, we always recommend the longest possible drying time in a warm space.